smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 family Device Model: ST3250820AS Serial Number: 5QE15J24 Firmware Version: 3.AAD User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Dec 16 23:01:25 2010 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 117) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 083 006 Pre-fail Always - 195491946 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1640 5 Reallocated_Sector_Ct 0x0033 089 089 036 Pre-fail Always - 446 7 Seek_Error_Rate 0x000f 076 055 030 Pre-fail Always - 13051599777 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3998 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1741 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 21841 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 052 045 Old_age Always - 34 (0 77 35 24) 194 Temperature_Celsius 0x0022 034 048 000 Old_age Always - 34 (0 14 0 0) 195 Hardware_ECC_Recovered 0x001a 077 058 000 Old_age Always - 53251801 197 Current_Pending_Sector 0x0012 092 090 000 Old_age Always - 179 198 Offline_Uncorrectable 0x0010 092 090 000 Old_age Offline - 179 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 3085 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3085 occurred at disk power-on lifetime: 3995 hours (166 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 8f 81 ce 20 e0 Error: UNC at LBA = 0x0020ce81 = 2150017 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 11 ce 20 e0 00 03:03:50.670 READ VERIFY SECTOR(S) EXT 42 00 ff 12 cd 20 e0 00 03:03:50.668 READ VERIFY SECTOR(S) EXT 42 00 ff 13 cc 20 e0 00 03:03:50.667 READ VERIFY SECTOR(S) EXT 42 00 ff 14 cb 20 e0 00 03:03:50.667 READ VERIFY SECTOR(S) EXT 42 00 ff 15 ca 20 e0 00 03:03:50.631 READ VERIFY SECTOR(S) EXT Error 3084 occurred at disk power-on lifetime: 3987 hours (166 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 6f 59 1c e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 6f 59 1c e0 00 00:33:14.657 SET MAX ADDRESS EXT 27 00 00 6f 59 1c e0 00 00:33:14.625 READ NATIVE MAX ADDRESS EXT 27 00 00 00 00 00 e0 00 00:33:14.594 READ NATIVE MAX ADDRESS EXT 00 00 01 00 00 00 00 04 00:33:14.589 NOP [Abort queued commands] 00 00 01 00 00 00 00 04 00:33:14.527 NOP [Abort queued commands] Error 3083 occurred at disk power-on lifetime: 3987 hours (166 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 c5 7f 9b 1f e0 Error: UNC at LBA = 0x001f9b7f = 2071423 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff 45 9b 1f e0 00 00:29:27.470 READ VERIFY SECTOR(S) EXT 42 00 ff 46 9a 1f e0 00 00:29:27.435 READ VERIFY SECTOR(S) EXT 42 00 ff 47 99 1f e0 00 00:29:27.434 READ VERIFY SECTOR(S) EXT 42 00 ff 48 98 1f e0 00 00:29:27.433 READ VERIFY SECTOR(S) EXT 42 00 ff 49 97 1f e0 00 00:29:27.431 READ VERIFY SECTOR(S) EXT Error 3082 occurred at disk power-on lifetime: 3984 hours (166 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 23 85 64 26 e0 Error: UNC at LBA = 0x00266485 = 2516101 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff a9 63 26 e0 00 01:57:41.780 READ VERIFY SECTOR(S) EXT 42 00 ff aa 62 26 e0 00 01:57:41.777 READ VERIFY SECTOR(S) EXT 42 00 ff ab 61 26 e0 00 01:57:41.776 READ VERIFY SECTOR(S) EXT 42 00 ff ac 60 26 e0 00 01:57:41.774 READ VERIFY SECTOR(S) EXT 42 00 ff ad 5f 26 e0 00 01:57:42.088 READ VERIFY SECTOR(S) EXT Error 3081 occurred at disk power-on lifetime: 3984 hours (166 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 09 b7 54 26 e0 Error: UNC at LBA = 0x002654b7 = 2512055 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 ff c1 53 26 e0 00 01:57:39.817 READ VERIFY SECTOR(S) EXT 42 00 ff c2 52 26 e0 00 01:57:39.816 READ VERIFY SECTOR(S) EXT 42 00 ff c3 51 26 e0 00 01:57:39.806 READ VERIFY SECTOR(S) EXT 42 00 ff c4 50 26 e0 00 01:57:39.545 READ VERIFY SECTOR(S) EXT 42 00 ff c5 4f 26 e0 00 01:57:39.543 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 50% 3998 2150017 # 2 Short offline Completed without error 00% 3991 - # 3 Short captive Completed: read failure 40% 3988 2150017 # 4 Short offline Completed without error 00% 3963 - # 5 Extended offline Completed: read failure 90% 3952 2154310 # 6 Extended offline Completed: read failure 90% 3952 2154310 # 7 Short offline Completed: read failure 60% 3952 2154310 # 8 Short offline Completed without error 00% 3947 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.