[    0.350991] pnp 00:06: [io  0x0044-0x005f]
[    0.350995] pnp 00:06: [io  0x0072-0x007f]
[    0.350998] pnp 00:06: [io  0x0080]
[    0.351001] pnp 00:06: [io  0x0084-0x0086]
[    0.351004] pnp 00:06: [io  0x0088]
[    0.351007] pnp 00:06: [io  0x008c-0x008e]
[    0.351010] pnp 00:06: [io  0x0090-0x009f]
[    0.351013] pnp 00:06: [io  0x00a2-0x00bf]
[    0.351016] pnp 00:06: [io  0x00e0-0x00ef]
[    0.351019] pnp 00:06: [io  0x04d0-0x04d1]
[    0.351023] pnp 00:06: [mem 0x00000550-0x0000055f]
[    0.351111] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.351117] system 00:06: [mem 0x00000550-0x0000055f] could not be reserved
[    0.351123] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.351139] pnp 00:07: [io  0x00f0-0x00ff]
[    0.351148] pnp 00:07: [irq 13]
[    0.351196] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.351300] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.351344] pnp 00:09: [io  0x0060]
[    0.351348] pnp 00:09: [io  0x0064]
[    0.351356] pnp 00:09: [irq 1]
[    0.351407] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.351480] pnp 00:0a: [irq 12]
[    0.351531] pnp 00:0a: Plug and Play ACPI device, IDs STLc000 SYN1507 ETD0001 PNP0f13 (active)
[    0.351694] pnp 00:0b: [mem 0xa0000000-0xbfffffff]
[    0.351775] system 00:0b: [mem 0xa0000000-0xbfffffff] has been reserved
[    0.351781] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.352121] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.352197] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.352205] pnp: PnP ACPI: found 13 devices
[    0.352208] ACPI: ACPI bus type pnp unregistered
[    0.360143] PCI: max bus depth: 1 pci_try_num: 2
[    0.360212] pci 0000:00:04.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.360219] pci 0000:00:04.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.360227] pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.360233] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.360238] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.360245] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.360251] pci 0000:00:04.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.360259] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[    0.360276] pci 0000:00:15.0: PCI bridge to [bus 03-05]
[    0.360281] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.360289] pci 0000:00:15.0:   bridge window [mem 0xfdf00000-0xfe8fffff]
[    0.360296] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360305] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[    0.360312] pci 0000:00:15.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.360324] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[    0.360329] pci 0000:00:15.2:   bridge window [io  0xd000-0xdfff]
[    0.360336] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.360381] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.360389] pci 0000:00:04.0: setting latency timer to 64
[    0.360412] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.360419] pci 0000:00:15.0: setting latency timer to 64
[    0.360431] pci 0000:00:15.1: setting latency timer to 64
[    0.360443] pci 0000:00:15.2: setting latency timer to 64
[    0.360450] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.360454] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.360458] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.360462] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[    0.360466] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.360471] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.360476] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.360482] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.360486] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.360491] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.360496] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xffffffff]
[    0.360501] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.360505] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe8fffff]
[    0.360510] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.360516] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.360521] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.360525] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.360601] NET: Registered protocol family 2
[    0.360843] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.362732] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.367624] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.368227] TCP: Hash tables configured (established 524288 bind 65536)
[    0.368235] TCP reno registered
[    0.368267] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.368322] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.368523] NET: Registered protocol family 1
[    0.368552] pci 0000:00:01.0: Boot video device
[    0.368601] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.976119] pci 0000:00:12.0: PCI INT A disabled
[    0.976151] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.976200] pci 0000:00:12.2: PCI INT B disabled
[    0.976213] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.056176] pci 0000:00:13.0: PCI INT A disabled
[    1.056209] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.056259] pci 0000:00:13.2: PCI INT B disabled
[    1.056327] pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.056361] pci 0000:06:00.0: PCI INT A disabled
[    1.056372] PCI: CLS 64 bytes, default 64
[    1.056376] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.056381] Placing 64MB software IO TLB between ffff88009b99e000 - ffff88009f99e000
[    1.056385] software IO TLB at phys 0x9b99e000 - 0x9f99e000
[    1.056765] perf: AMD IBS detected (0x000000ff)
[    1.057037] audit: initializing netlink socket (disabled)
[    1.057056] type=2000 audit(1347474785.056:1): initialized
[    1.097412] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.101212] VFS: Disk quotas dquot_6.5.2
[    1.101313] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.102320] fuse init (API version 7.17)
[    1.102478] msgmni has been set to 6825
[    1.103093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.103145] io scheduler noop registered
[    1.103148] io scheduler deadline registered
[    1.103212] io scheduler cfq registered (default)
[    1.103693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.103739] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.109431] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.114467] ACPI: AC Adapter [ADP1] (on-line)
[    1.124533] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0a/PNP0C09:00/PNP0C0D:00/input/input0
[    1.129532] ACPI: Lid Switch [LID0]
[    1.129613] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.129621] ACPI: Power Button [PWRB]
[    1.129693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.129698] ACPI: Power Button [PWRF]
[    1.132233] ACPI: acpi_idle registered with cpuidle
[    1.144212] thermal LNXTHERM:00: registered as thermal_zone0
[    1.144219] ACPI: Thermal Zone [THRM] (62 C)
[    1.144256] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.144273] ACPI: Battery Slot [BAT1] (battery present)
[    1.144375] ERST: Table is not found!
[    1.144378] GHES: HEST is not enabled!
[    1.144530] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.164193] Freeing initrd memory: 13876k freed
[    1.281203] Linux agpgart interface v0.103
[    1.284148] brd: module loaded
[    1.285654] loop: module loaded
[    1.285909] ahci 0000:00:11.0: version 3.0
[    1.285947] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.286120] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.286127] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.287258] scsi0 : ahci
[    1.287557] scsi1 : ahci
[    1.287756] scsi2 : ahci
[    1.287898] scsi3 : ahci
[    1.287998] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
[    1.288040] ata2: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c180 irq 19
[    1.288046] ata3: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c200 irq 19
[    1.288051] ata4: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c280 irq 19
[    1.288277] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.288892] Fixed MDIO Bus: probed
[    1.288928] tun: Universal TUN/TAP device driver, 1.6
[    1.288931] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.289143] PPP generic driver version 2.4.2
[    1.289385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.289423] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.289467] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.289591] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.289608] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.289650] QUIRK: Enable AMD PLL fix
[    1.289669] ehci_hcd 0000:00:12.2: debug port 1
[    1.289709] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[    1.300252] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.300720] hub 1-0:1.0: USB hub found
[    1.300733] hub 1-0:1.0: 5 ports detected
[    1.300874] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.300917] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.301195] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.301215] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.301256] ehci_hcd 0000:00:13.2: debug port 1
[    1.301282] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
[    1.312252] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.312747] hub 2-0:1.0: USB hub found
[    1.312758] hub 2-0:1.0: 5 ports detected
[    1.312908] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.312941] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.312984] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.313285] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.313355] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[    1.320388] ACPI: Battery Slot [BAT1] (battery present)
[    1.372695] hub 3-0:1.0: USB hub found
[    1.372709] hub 3-0:1.0: 5 ports detected
[    1.372838] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.372881] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.373163] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.373209] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
[    1.432690] hub 4-0:1.0: USB hub found
[    1.432704] hub 4-0:1.0: 5 ports detected
[    1.432837] uhci_hcd: USB Universal Host Controller Interface driver
[    1.432910] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.432955] xhci_hcd 0000:06:00.0: setting latency timer to 64
[    1.432962] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    1.433232] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    1.433420] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfea00000
[    1.433534] xhci_hcd 0000:06:00.0: irq 40 for MSI/MSI-X
[    1.433545] xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
[    1.433554] xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
[    1.434079] xHCI xhci_add_endpoint called for root hub
[    1.434085] xHCI xhci_check_bandwidth called for root hub
[    1.434154] hub 5-0:1.0: USB hub found
[    1.434167] hub 5-0:1.0: 2 ports detected
[    1.434287] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    1.434560] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    1.437171] xHCI xhci_add_endpoint called for root hub
[    1.437177] xHCI xhci_check_bandwidth called for root hub
[    1.437246] hub 6-0:1.0: USB hub found
[    1.437259] hub 6-0:1.0: 2 ports detected
[    1.452469] usbcore: registered new interface driver libusual
[    1.452554] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.474147] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.474163] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.474443] mousedev: PS/2 mouse device common for all mice
[    1.475398] rtc_cmos 00:04: RTC can wake from S4
[    1.475568] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.475604] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.475751] device-mapper: uevent: version 1.0.3
[    1.475898] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.475985] cpuidle: using governor ladder
[    1.476130] cpuidle: using governor menu
[    1.476134] EFI Variables Facility v0.08 2004-May-17
[    1.476494] TCP cubic registered
[    1.476672] NET: Registered protocol family 10
[    1.477459] NET: Registered protocol family 17
[    1.477468] Registering the dns_resolver key type
[    1.477745] PM: Hibernation image not present or could not be loaded.
[    1.477768] registered taskstats version 1
[    1.492632]   Magic number: 12:857:594
[    1.492779] rtc_cmos 00:04: setting system clock to 2012-09-12 18:33:05 UTC (1347474785)
[    1.492797] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[    1.492951] powernow-k8:    0 : pstate 0 (1650 MHz)
[    1.492955] powernow-k8:    1 : pstate 1 (1320 MHz)
[    1.492958] powernow-k8:    2 : pstate 2 (825 MHz)
[    1.493326] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.493330] EDD information not available.
[    1.495460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.608304] ata2: SATA link down (SStatus 0 SControl 300)
[    1.608352] ata3: SATA link down (SStatus 0 SControl 300)
[    1.608394] ata4: SATA link down (SStatus 0 SControl 300)
[    1.612263] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.752269] Initializing USB Mass Storage driver...
[    1.752651] scsi4 : usb-storage 1-2:1.0
[    1.752815] usbcore: registered new interface driver usb-storage
[    1.752819] USB Mass Storage support registered.
[    1.780277] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.783935] ata1.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
[    1.783949] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.787200] ata1.00: configured for UDMA/133
[    1.787719] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 01.0 PQ: 0 ANSI: 5
[    1.788037] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.788042] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.788086] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.788146] sd 0:0:0:0: [sda] Write Protect is off
[    1.788151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.788195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.825186]  sda: sda1 sda2 sda3 < sda5 >
[    1.827043] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.829888] Freeing unused kernel memory: 920k freed
[    1.830375] Write protecting the kernel read-only data: 12288k
[    1.840565] Freeing unused kernel memory: 1616k freed
[    1.848919] Freeing unused kernel memory: 1200k freed
[    1.860104] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    1.887873] udevd[96]: starting version 175
[    2.059406] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.059446] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.059497] r8169 0000:03:00.0: setting latency timer to 64
[    2.059578] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    2.060337] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000656000, 6c:62:6d:36:6d:43, XID 0c200000 IRQ 43
[    2.060343] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.072137] scsi5 : pata_atiixp
[    2.075100] scsi6 : pata_atiixp
[    2.077287] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[    2.077294] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[    2.096071] Refined TSC clocksource calibration: 1646.493 MHz.
[    2.096082] Switching to clocksource tsc
[    2.365569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.754013] scsi 4:0:0:0: Direct-Access                               0.00 PQ: 0 ANSI: 2
[    2.755316] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.757087] sd 4:0:0:0: [sdb] 7805887 512-byte logical blocks: (3.99 GB/3.72 GiB)
[    2.757719] sd 4:0:0:0: [sdb] Write Protect is off
[    2.757729] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[    2.758351] sd 4:0:0:0: [sdb] Asking for cache data failed
[    2.758360] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    2.761701] sd 4:0:0:0: [sdb] Asking for cache data failed
[    2.761709] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.372732]  sdb: sdb1
[    3.376374] sd 4:0:0:0: [sdb] Asking for cache data failed
[    3.376386] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.376397] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.740884] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.896844] Adding 3646460k swap on /dev/sda5.  Priority:-1 extents:1 across:3646460k 
[    6.015205] udevd[448]: starting version 175
[    7.202475] lp: driver loaded but no devices found
[    8.558189] wmi: Mapper loaded
[    8.643720] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.701257] acpi device:15: registered as cooling_device2
[    8.702710] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
[    8.704732] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.953215] cfg80211: Calling CRDA to update world regulatory domain
[    9.068454] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    9.068583] SP5100 TCO timer: mmio address 0xbafe00 already in use
[    9.096989] msi_laptop: Identified laptop model 'MSI U270'
[    9.096996] msi_laptop: Brightness ignored, must be controlled by ACPI video driver
[    9.108928] input: MSI Laptop hotkeys as /devices/virtual/input/input5
[   10.108234] msi_laptop: driver 0.5 successfully loaded
[   10.760915] rtl8192ce 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.760930] rtl8192ce 0000:07:00.0: setting latency timer to 64
[   10.838124] type=1400 audit(1347474794.841:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
[   10.838229] type=1400 audit(1347474794.841:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser"
[   10.838769] type=1400 audit(1347474794.841:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
[   10.838912] type=1400 audit(1347474794.841:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
[   10.839151] type=1400 audit(1347474794.841:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
[   10.839307] type=1400 audit(1347474794.841:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser"
[   10.950236] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K
[   10.989964] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   10.989973] Disabling lock debugging due to kernel taint
[   11.068660] [fglrx] Maximum main memory to use for locked dma buffers: 3277 MBytes.
[   11.068797] [fglrx]   vendor: 1002 device: 9806 count: 1
[   11.069817] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[   11.069841] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.069849] pci 0000:00:01.0: setting latency timer to 64
[   11.070751] [fglrx] Kernel PAT support is enabled
[   11.070791] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[   11.220538] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   11.220546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220551] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   11.220555] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220560] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   11.220564] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220568] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   11.220573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220576] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   11.220581] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220585] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   11.220589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220593] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   11.220597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220601] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   11.220605] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220609] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   11.220613] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220617] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   11.220621] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220625] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   11.220630] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220633] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   11.220638] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220642] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   11.220646] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   11.220650] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   11.221012] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   11.221205] cfg80211: Pending regulatory request, waiting for it to be processed...
[   11.517766] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   11.518681] rtlwifi: wireless switch is on
[   11.819344] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input6
[   12.074861] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   12.077073] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   12.077254] snd_hda_intel 0000:00:01.1: irq 44 for MSI/MSI-X
[   12.077292] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[   12.077707] Initializing rts5139 USB card reader driver...
[   12.082125] scsi7 : SCSI emulation for RTS5139 USB card reader
[   12.082631] scsi 7:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   12.082684] usbcore: registered new interface driver rts5139
[   12.082688] Realtek rts5139 USB card reader support registered.
[   12.089794] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   12.090805] sd 7:0:0:0: Attached scsi generic sg2 type 0
[   12.197294] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   12.197303] cfg80211: World regulatory domain updated:
[   12.197306] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.197312] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.197316] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.197321] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.197325] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.197329] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.197356] cfg80211: Calling CRDA for country: EC
[   12.205460] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   12.205469] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205474] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   12.205479] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205483] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   12.205488] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205492] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   12.205496] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205500] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   12.205504] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205508] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   12.205513] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205516] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   12.205521] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205525] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   12.205529] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205533] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   12.205537] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205541] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   12.205545] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205549] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   12.205553] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205557] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   12.205562] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205565] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   12.205570] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.205573] cfg80211: Disabling freq 2484 MHz
[   12.205579] cfg80211: Regulatory domain changed to country: EC
[   12.205582] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.205586] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.205591] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[   12.205595] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[   12.205599] cfg80211:     (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[   12.263726] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   12.263891] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[   12.265695] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.353162] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[   12.353458] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[   14.392669] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[   14.392676] vesafb: scrolling: redraw
[   14.392681] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   14.394622] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011200000, using 3072k, total 3072k
[   14.394915] Console: switching to colour frame buffer device 128x48
[   14.394957] fb0: VESA VGA frame buffer device
[   35.038260] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   35.247961] init: failsafe main process (917) killed by TERM signal
[   37.389260] ppdev: user-space parallel port driver
[   38.423787] Bluetooth: Core ver 2.16
[   38.423839] NET: Registered protocol family 31
[   38.423842] Bluetooth: HCI device and connection manager initialized
[   38.423848] Bluetooth: HCI socket layer initialized
[   38.423851] Bluetooth: L2CAP socket layer initialized
[   38.423861] Bluetooth: SCO socket layer initialized
[   38.464971] type=1400 audit(1347474822.469:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1036 comm="apparmor_parser"
[   38.465669] type=1400 audit(1347474822.469:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1036 comm="apparmor_parser"
[   38.466057] type=1400 audit(1347474822.469:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1036 comm="apparmor_parser"
[   38.516049] type=1400 audit(1347474822.521:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1013 comm="apparmor_parser"
[   38.516850] type=1400 audit(1347474822.521:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1013 comm="apparmor_parser"
[   38.723450] type=1400 audit(1347474822.729:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1035 comm="apparmor_parser"
[   38.734860] Bluetooth: RFCOMM TTY layer initialized
[   38.734871] Bluetooth: RFCOMM socket layer initialized
[   38.734874] Bluetooth: RFCOMM ver 1.11
[   39.115686] type=1400 audit(1347474823.117:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1037 comm="apparmor_parser"
[   39.123501] type=1400 audit(1347474823.125:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1037 comm="apparmor_parser"
[   39.125435] type=1400 audit(1347474823.129:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1037 comm="apparmor_parser"
[   39.127145] type=1400 audit(1347474823.129:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1037 comm="apparmor_parser"
[   39.147565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   39.147571] Bluetooth: BNEP filters: protocol multicast
[   39.471807] r8169 0000:03:00.0: eth0: link down
[   39.472703] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.473354] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   39.480186] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   39.818433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.818940] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   40.378712] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[   40.989149] vboxdrv: Found 2 processor cores.
[   40.989583] vboxdrv: fAsync=0 offMin=0x3b4 offMax=0xc15
[   40.989704] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   40.989708] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   42.238847] vboxpci: IOMMU not found (not registered)
[   42.898433] [fglrx] ATIF platform detected with notification ID: 0x81
[   43.315514] wlan0: authenticate with 00:06:4f:86:39:6e (try 1)
[   43.317125] wlan0: authenticated
[   43.317623] wlan0: associate with 00:06:4f:86:39:6e (try 1)
[   43.321441] wlan0: RX AssocResp from 00:06:4f:86:39:6e (capab=0x401 status=0 aid=3)
[   43.321449] wlan0: associated
[   43.322660] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   44.336358] fglrx_pci 0000:00:01.0: irq 45 for MSI/MSI-X
[   44.337738] [fglrx] Firegl kernel thread PID: 1399
[   44.338126] [fglrx] Firegl kernel thread PID: 1400
[   44.338517] [fglrx] Firegl kernel thread PID: 1401
[   44.338717] [fglrx] IRQ 45 Enabled
[   44.503815] [fglrx] Gart USWC size:1072 M.
[   44.503822] [fglrx] Gart cacheable size:424 M.
[   44.503831] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   44.503836] [fglrx] Reserved FB block: Unshared offset:fca3000, size:35d000 
[   44.503840] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 
[   49.032831] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013863ac80), AE_AML_INFINITE_LOOP (20110623/psparse-536)
[   49.032862] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013863aa00), AE_AML_INFINITE_LOOP (20110623/psparse-536)
[   54.368044] wlan0: no IPv6 routers present
[  724.963075] ehci_hcd 0000:00:12.2: force halt; handshake ffffc9000061a024 00004000 00000000 -> -110
[  724.963083] ehci_hcd 0000:00:12.2: HC died; cleaning up
[  724.963197] usb 1-2: USB disconnect, device number 2
[  724.972748] sd 4:0:0:0: [sdb] Unhandled error code
[  724.972759] sd 4:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  724.972768] sd 4:0:0:0: [sdb] CDB: Write(10): 2a 00 00 00 3b 0f 00 00 a8 00
[  724.972787] end_request: I/O error, dev sdb, sector 15119
[  724.972796] quiet_error: 27 callbacks suppressed
[  724.972803] Buffer I/O error on device sdb1, logical block 15056
[  724.972807] lost page write due to I/O error on sdb1
[  724.972816] Buffer I/O error on device sdb1, logical block 15057
[  724.972820] lost page write due to I/O error on sdb1
[  724.972824] Buffer I/O error on device sdb1, logical block 15058
[  724.972828] lost page write due to I/O error on sdb1
[  724.972833] Buffer I/O error on device sdb1, logical block 15059
[  724.972837] lost page write due to I/O error on sdb1
[  724.972842] Buffer I/O error on device sdb1, logical block 15060
[  724.972846] lost page write due to I/O error on sdb1
[  724.972851] Buffer I/O error on device sdb1, logical block 15061
[  724.972855] lost page write due to I/O error on sdb1
[  724.972859] Buffer I/O error on device sdb1, logical block 15062
[  724.972863] lost page write due to I/O error on sdb1
[  724.972868] Buffer I/O error on device sdb1, logical block 15063
[  724.972872] lost page write due to I/O error on sdb1
[  724.972882] Buffer I/O error on device sdb1, logical block 15064
[  724.972886] lost page write due to I/O error on sdb1
[  724.972890] Buffer I/O error on device sdb1, logical block 15065
[  724.972894] lost page write due to I/O error on sdb1
[  724.977847] sd 4:0:0:0: [sdb] Unhandled error code
[  724.977862] sd 4:0:0:0: [sdb]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  724.977881] sd 4:0:0:0: [sdb] CDB: Write(10): 2a 00 00 00 3a 1f 00 00 f0 00
[  724.977942] end_request: I/O error, dev sdb, sector 14879
[  724.989540] usb 1-4: USB disconnect, device number 3